Classify the battery and its packing configuration first, then check the rules for every transport leg. UN38.3 testing, test summaries, packaging inspection, declarations and carrier acceptance have different scopes and exceptions. A small battery or a battery installed in equipment is not automatically unrestricted cargo.
1. Why lithium batteries need special handling
Lithium-ion and lithium-metal batteries have different chemistries but can both present short-circuit, heat and fire hazards. Transport rules assign them to Class 9. Protect terminals, prevent movement and damage, and identify swollen, recalled or damaged units before booking.
Do not infer a fire-response method from the shipping classification. Site emergency procedures and trained responders must address the actual battery chemistry and condition. PHMSA’s lithium-battery guidance explains the transport hazards and testing framework.
2. Common UN numbers and packing configurations
| UN number | Configuration | Air packing instruction |
|---|---|---|
| UN3480 | Standalone lithium-ion batteries | PI965 |
| UN3481 | Li-ion packed with equipment / contained in equipment | PI966 / PI967 |
| UN3090 | Standalone lithium-metal batteries | PI968 |
| UN3091 | Li-metal packed with equipment / contained in equipment | PI969 / PI970 |
“Packed with equipment” means the batteries and the equipment they power are in the same package; unrelated separate boxes do not establish that classification. Power banks are batteries, not equipment containing batteries. Vehicles and some battery-powered equipment have separate entries; this table is not an exhaustive classification list.
Damaged or defective batteries liable to dangerous heat, fire or short circuit are prohibited by air. Sea transport needs a separate assessment under the applicable IMDG special provisions and packaging instructions; do not use the normal-battery booking process.
3. Documents: check the scope of each requirement
3.1 UN38.3 testing and the test summary
Applicable battery designs must pass the relevant UN38.3 tests; the required tests depend on the cell/battery type. Obtain the manufacturer’s matching test summary and check the model and report identifiers. A report documents testing; the summary is the supply-chain document that must be made available where required.
There is no universal one- or three-year expiry for the test summary. Design changes requiring retesting change that assessment. A carrier may separately request a current transport appraisal or supporting information; do not confuse this with expiry of UN38.3 testing. See IATA FAQ C.10.
3.2 SDS / MSDS
SDS is the current name for the safety data sheet; older documents may say MSDS. Carriers may request it to review a product. It neither replaces a UN38.3 test summary nor determines the transport classification by itself. Confirm the content and language required for the product and destination; an SDS is not a universal IATA requirement for every battery shipment.
3.3 China export packaging inspection
Where export dangerous-goods packaging inspection applies, distinguish packaging performance appraisal from packaging use appraisal. The packaging manufacturer applies for the former; the producer using the packaging applies for the latter. This is not sea-only paperwork and is not required identically for every lithium-battery shipment. Confirm applicable exceptions, consignment details and document validity with Customs. China Customs application guide.
3.4 Dangerous-goods declarations
Prepare the shipper’s air declaration or sea dangerous-goods transport document when the applicable rules require it. Sea container/vehicle packing certification is a separate requirement where applicable. The responsible shipper and packer must ensure the information is accurate; copies, electronic formats and submission deadlines depend on the route and operator.
4. Air transport: PI sections, mass and charge
The table summarizes ordinary limits, excluding special approvals. Section eligibility also depends on energy/lithium content and packaging. Small-cell thresholds are 20 Wh per Li-ion cell / 100 Wh per battery, or 1 g lithium per Li-metal cell / 2 g per battery. These are different from the package mass limits below.
| UN / PI section | Passenger aircraft | Cargo aircraft | Quantity basis |
|---|---|---|---|
| UN3480 · PI965 IA | Forbidden | 35 kg | Battery net mass per package |
| UN3480 · PI965 IB | Forbidden | 10 kg | Battery net mass per package |
| UN3481 · PI966 / PI967 I | 5 kg | 35 kg | Battery net mass per package |
| UN3481 · PI966 / PI967 II | 5 kg | 5 kg | Battery net mass per package |
| UN3090 · PI968 IA | Forbidden | 35 kg | Battery net mass per package |
| UN3090 · PI968 IB | Forbidden | 2.5 kg | Battery net mass per package |
| UN3091 · PI969 / PI970 I | 5 kg | 35 kg | Battery net mass per package |
| UN3091 · PI969 / PI970 II | 5 kg | 5 kg | Battery net mass per package |
Source: IATA 2026 — pp. 10–14.
- Sections: PI966/967/969/970 use I and II, not IB. Meeting a mass limit alone does not establish Section II eligibility.
- State of charge: PI965 requires ≤30%; exceeding this needs State of Origin and State of the Operator approval under A331. From 2026, PI966 I also requires ≤30%; PI966 II applies this limit to cells and batteries above 2.7 Wh. PI966 shipments subject to these limits that exceed 30% must follow Section I with approval from the State of Origin and State of the Operator and comply with their written conditions; they cannot remain Section II shipments. PI967 recommends ≤30% charge or ≤25% indicated capacity, with carrier variations checked separately.
- Labels and declarations: select the marks, labels and documents for the exact PI/section. Limited battery-mark exceptions do not remove every other requirement.
- Acceptance: confirm operator variations, packaging tests and approval lead time before booking. There is no universal 48-hour clearance guarantee.
5. Sea transport: IMDG classification and acceptance
IMDG Code amendment 42-24 is mandatory from 1 January 2026. IMO edition information.
- Assess exceptions: eligible small batteries may use Special Provision 188 only when all its conditions are met. A capacity rating alone is insufficient.
- Packaging: determine the applicable instruction from classification and condition; do not assume every battery needs the same UN packaging or export packaging certificate.
- Container: carrier acceptance, packing, securing and segregation matter. Shipper-owned containers are not universally compulsory and are unrelated to battery state of charge.
- Documents and cutoffs: obtain the carrier/terminal requirements for the exact UN number, route and package. Do not put UN3480 on every lithium-battery document.
China Maritime Safety Administration’s SP188 response illustrates why marking, maritime reporting and Customs paperwork must be checked separately.
6. China trucking and terminal handover
For the China road leg, use the current dangerous-goods transport rules and JT/T 617. Check whether every condition of an applicable exception is met, including Special Provision 188 where relevant; do not assume all batteries may use ordinary trucks or that all need identical DG arrangements.
Where DG road transport applies, verify the operator, vehicle and personnel qualifications, packaging checks and route restrictions. Obtain warehouse and terminal acceptance before dispatch. MOT transport rules;JT/T 617.3 SP188 amendment.
7. Destination compliance: transport and market access
| Market | Check before sale/import |
|---|---|
| United States | Separate 49 CFR transport duties from product safety, recycling, retailer and state requirements. Hazmat registration or a particular product certification is not automatic for every battery. |
| European Union | Apply Regulation (EU) 2023/1542 by battery category and effective date, including conformity, labelling and producer obligations. Transportation documents do not replace market-access compliance. |
| Great Britain | Batteries themselves do not require a CE/UKCA conformity mark under the GB battery regime. Other labelling, substance and producer duties still apply; equipment containing the battery may have separate marking duties. |
| Northern Ireland | EU Regulation 2023/1542 applies. CE, or CE with UKNI where applicable, must be assessed under the relevant conformity procedure. |
| Other destinations | Ask the importer to identify the rules for the actual battery and end use. Do not infer PSE, RCM, EAC or SABER obligations solely from “lithium battery”. |
GOV.UK — battery product marking;GOV.UK — battery obligations;EU Battery Regulation 2023/1542.
8. Customs classification and rebate checks
Customs HS classification and dangerous-goods UN classification serve different purposes. Rechargeable lithium-ion batteries generally fall within HS 8507.60 and primary lithium cells within 8506.50, but the full national code depends on the actual product. A battery-management system, a complete machine and a battery are not interchangeable classifications.
Check the current full code, declaration date and product description against China’s export rebate schedule. Do not apply a fixed 13% rate or infer a national subheading from capacity alone. Also screen applicable export-control, end-use and destination requirements before booking. HS classification guide · 2026 export rebate changes.
9. Six mistakes to avoid
- Treating a transport exception as permission to conceal battery contents.
- Using a test summary for a different model or overlooking a design change.
- Confusing battery net mass, package gross mass, Wh and lithium content.
- Copying one label/declaration set across different PI sections and transport modes.
- Overlooking PI966 charge requirements or an operator’s stricter conditions.
- Dispatching before carrier, warehouse and destination acceptance are confirmed.
10. How to compare cost and transit time
A usable quotation needs the UN number, PI/section where relevant, Wh or lithium content, battery net mass, package count and dimensions, condition, origin, destination and ready date. Ask for written acceptance before comparing prices.
| Option | Confirm in the quote |
|---|---|
| Air | Aircraft eligibility, operator acceptance, DG handling, chargeable weight and airport/door scope. |
| FCL / LCL ocean | DG acceptance, terminal/CFS conditions, free time, surcharges and destination charges. |
| DDP / FBA | Importer responsibilities, tax scope and the receiving platform/warehouse’s current product eligibility. |
| Rail / multimodal | Acceptance of this battery and packing configuration on every rail and road leg; do not presume general China-Europe rail availability. |
Transit times and prices vary with acceptance, routing, documents and capacity. Request a dated, cargo-specific quotation; neither a fixed market range nor a promised FBA review period is reliable without those details.
11. How Mighty International can help
Send the product specification and available testing documents. We can help coordinate the transport inquiry, document checklist and carrier acceptance assessment; the confirmed service scope depends on the cargo and route.
- Compare feasible sea and air options after the carrier confirms acceptance.
- Coordinate packaging, document and destination handovers with the responsible parties.
- Identify where a laboratory, qualified DG operator, importer or product-compliance specialist must confirm a requirement.
Discuss a lithium-battery shipment
Include chemistry, model, Wh, net battery mass, packing configuration and destination.
Contact Us常见问题 FAQ
What is the difference between UN3480 and UN3481?
UN3480 covers standalone lithium-ion batteries. UN3481 covers batteries packed with the equipment they power in the same package (PI966), or installed in equipment (PI967). Separate battery and equipment packages do not automatically qualify as packed with equipment.
Does a UN38.3 test summary expire after one or three years?
No universal expiry applies to the test summary. Check that it matches the battery design and that no change requires retesting. A carrier’s separate request for a current transport appraisal is a different requirement.
Is every lithium-battery shipment fully regulated in the same way?
No. Check the chemistry, energy or lithium content, configuration, condition and transport mode. Any exception requires all its conditions to be met, and carrier acceptance must still be confirmed.
Does an SDS replace UN38.3 documents?
No. A safety data sheet, a test report and a test summary serve different purposes. Ask the carrier which documents are required for the actual shipment.
How should lithium batteries be sent to Amazon FBA?
First confirm the product’s eligibility in the destination marketplace and receiving warehouse. Then obtain carrier acceptance and a quotation for the actual cargo. Neither DDP nor a UN38.3 document guarantees platform acceptance, a fixed review period or the lowest cost.
References and further reading
Sources checked on 2026-10-04. Use the current rules and operator variations for the actual shipment.
- IATA — 2026 Battery Guidance Document (PI tables, charge limits, FAQ C.10)
- PHMSA — Transporting Lithium Batteries
- IMO — IMDG Code 2024 edition / amendment 42-24
- China Customs — export dangerous-goods packaging use appraisal
- China MSA — lithium batteries and SP188
- MOT — Road Transport of Dangerous Goods rules (2026)
- MOT — JT/T 617.3 Special Provision 188 amendment
- GOV.UK — battery conformity marking in GB and NI
- GOV.UK — battery labelling and other obligations
- EUR-Lex — Regulation (EU) 2023/1542
This guide supports shipment preparation. Final classification, packing and acceptance must be confirmed for the actual cargo, route and current rules.